This step by step diy woodworking project is about bike shed roof plans.this is part 2 of the bike shed, where i show you how to build the lean to roof. this roof frame is super sturdy and it will also drain the water easily.. Attach the end rafters to the wall plates of your shed frame. lower the first rafter truss into place at either the front or back of the shed. fasten the truss by driving 8d finishing nails at an angle down through the board just above the birdsmouth notch and into the underlying wall plate. use 3 nails for each side.. You will build all the walls directly on the empty floor. read this post first if you want to build your shed with 8ft wall height.; if you�re going to build your shed on a concrete slab read this post to learn about anchor bolt placement and to find out how to make your shed 3 inches taller.; you�ll want to build the shorter walls first so you can move them aside and use the floor space.
No comments:
Post a Comment